Description:
This is a new 5V RGB neon light, equipped with a 3-button switch music controller, easy to operate. Regarding the use of music function, when the "music button" is pressed, the controller turns on or off the music function, and then drives the RGB jumping effect of neon lights through external music rhythm.
Specification:
Input voltage: DC5V,
Color: RGB
Beads:SMD 3535
Lamp beads quantity:60LEDs/m
Neon light external dimensions W4mm x H13mm,
Waterproof grade: IP65
Product manual:
Installation:
1. Place the lighting fixtures in the appropriate position
2. Data cable link mobile power bank
3.Once connected, it can be used immediately
Product function introduction:
This product is a USBplug in decorative lighting
fixture,with 3-key music control,pickup capability,and the
ability to change lighting modes.
LED light strips suitable for room decoration,party
decoration,birthday decoration,and holiday decoration.
information to User:
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide
reasonable protection aqainst harmful interference in a residential installation.This
equipment generates,uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no quarantee that interference will not occur in a
particular installation.If this equipment causes harmful interference to radio or television
reception, which can be determined by turning the equipment on and off, the user is
encouraged to try to correct the interference by taking one or more of the
following measures:
-Reorient or relocate the receiving antenna.
-Plug the equipment into an outlet on a circuit different from that
to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
Important: Changes or modifications not expressly approved by
the manufacturer responsible for compliance could void the
user's authority to operate the equipment.
Note:
> The LED strip cannot directly connect to AC 110V and 220V, must add DC 5V transformer!
> Power supply is not include.
> The back of the neon strip does not have adhesive and needs to be fixed with clips.
> Soldered is very normal in a electronic products,not any quality problem.
> It is RGB led strip that can only light up on color at one time.
> Some televisions may not have enough output current to drive the LED strip. If the TV does not light up when connected, please replace it with a larger power supply. Thank you!
> Please contact us first before you open a dispute or give a negative feedback, we will solve the problem try my best. Thank you so much.
Package Include:
1 x Neon Strip(Not include power supply)
Pictures:
